Product features:

① Powerful function: in addition to meeting various requirements of customers in weighing accuracy and speed, it can also configure various instruments and electrical accessories according to customers' needs, which greatly expands the applicability of the product;

② The product itself has reasonable and concise structural design and stable performance. The filling liquid pipeline is made of stainless steel, which can be widely used in liquid filling with various characteristics;

2. Applicable environment:

This series of explosion-proof filling scales are suitable for most explosive gas and explosive dust environments;

3. Typical applications:

Liquid filling in explosion-proof environment in petroleum, chemical, pharmaceutical, coating, smelting, food processing and other industries; It is suitable for quantitative filling occasions with the characteristics of pollution and corrosion and materials that are prone to foam when filling.

Function:

◆ fast and slow double speed automatic quantitative filling;

◆ gross weight and net weight (automatic peeling) can be selected;

◆ manual and automatic modes can be selected to facilitate operation and maintenance;

◆ selection of working mode above or below the liquid level;

◆ pneumatic bottom valve and liquid receiving cup are designed to ensure filling accuracy;

◆ mandatory filling;

◆ automatic diagnosis and fault alarm function;

◆ tolerance detection and out of tolerance alarm;

◆ the setting point is adjustable;

◆ automatic peeling overcomes the influence of inconsistent container weight on accuracy;

◆ empty scale detection. If the empty bucket is too light or heavy, it will give an alarm;

◆ the lifting speed of spray gun is adjustable;

◆ self locking control, filling is allowed after the spray gun is lowered in place;

◆ when lowering the spray gun, it will bounce back automatically after touching the barrel;

◆ large operation keys;

Technical indicators:

1. Rated filling weight: 20-1500kg

2. The filling speed is related to the on-site pipe diameter and material flow rate

3. Division value: 0.05kg

4. Weighing accuracy ± 2 ‰ FS

5. Compressed air 0.5-0.7mpa, 10m3 / h

6. Working environment temperature: - 10 ~ + 45 ° C, relative humidity ≤ 90%

7. Power supply: AC220V, 50Hz, 1KW

remarks:

The material viscosity is lower than 20000 CP. before entering the filling system, the material pressure shall be 0.3 ± 0.1MPa and the flow shall be greater than 300L / min

Explosion proof filling machine customer site